Mobile:18928206361
Telphone:0769-82586018
Fax:0769-81668689
E-mail:[email protected]
|
Dong Yuan brake motor model
ETEFDA (IMB3 horizontal mounting)
ETEFDD (IMB5 vertical mounting)
ETVFDA (IMB3 horizontal mounting)
ETVFDD (IMB5 vertical mounting)
East brake motor specifications
Three phase asynchronous motor
Rated voltage: 380V or other voltage
Rated frequency: 50HZ
Output power: 0.75 ~ 375KW
Base number: 80 ~ 400A
Protection level: IP55
Cooling mode: IC411
Requirements for the use of brake motors in the East
Power supply condition: voltage fluctuation rate is less than 10%; frequency fluctuation rate is less than 5%; the overall fluctuation rate of voltage and frequency is within 10%, but the frequency fluctuation rate is not more than + 5%
Use place: indoor, no dangerous gas environment
Ambient temperature: -15~40 DEG C
Ambient humidity: below 90% Rh (but not condensed)
Altitude: below 1000m altitude
Transmission: belt drive, but 2P, 22KW and above, 4P&6P, Fr#280 and above use the shaft drive
Direction of rotation: it can rotate in two directions. When the power phase sequence is consistent with the letters of the end of the motor, the direction of the shaft is turned counterclockwise
Start mode: full voltage starting directly or Y- delta starting
East brake motor features
The brake is simple in structure: less parts, high reliability, easy adjustment of air gap and convenient maintenance
Small size, light weight and easy installation: the motor and the brake are connected together, the volume is reduced to the minimum, the weight is light, the structure is firm, and the small space can be installed
Brake noise low: D.C. brake, no electromagnetic sound, brake noise is very low
Apply a variety of voltage: brake power supply, motor tap supply, according to different wiring way, take out the appropriate voltage (A.C220V to 240V), rectifier rectifier to DC power supply (DC80V to 100V)
- high frequency braking: brake pads using advanced non asbestos material, resistant to high frequency, low wear rate, and no pollution
Selection of world famous factory produced rolling bearings and special selection of advanced grease, easy to change, sealed, and bearing life long
Class E insulation (frame number 63 to 112M), class B insulation (frame number 132S to 180M)
Braking principle of East brake motor
It adopts DC brake, so it has little noise. A special internal structure, the braking force, braking and flexible for emergency stop and frequent start and stop the endurance strength, can prevent the stop in a short time heavy load mechanical reversal and big inertia, superior performance.
- 2016-09-14How to care for small electric hoist
- 2016-09-12Analysis of medium voltage inverter mark…
- 2016-09-10Three trends of small motor manufacturin…
- 2016-09-09Drive mode of motor
- 2016-09-083 basic ways to improve the heat dissipa…
- 2016-09-07Is the brake motor the same type as the …
- 2016-09-06Attention to the specifications and type…
- 2016-09-05Space analysis of the development of spe…
- 2016-09-02Method for preventing motor noise
- 2016-08-30Types of motors